You are here: Home » News » TFT LCD Display Knowledge » How To Separate Touch Screen From Lcd?

How To Separate Touch Screen From Lcd?

Views: 222     Author: Wendy     Publish Time: 2025-02-03      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Content Menu

Tools and Materials Required

Step-by-Step Separation Process

>> Method 1: Using an LCD Separator Machine

>> Method 2: Manual Separation

Advanced Techniques for Stubborn Screens

>> 1. Freezing Method:

>> 2. Double-Heating:

>> 3. Edge-First Separation:

Common Mistakes to Avoid

Post-Separation Steps

>> 1. Inspect the LCD:

>> 2. Apply New Adhesive:

>> 3. Test Functionality:

Troubleshooting Post-Repair Issues

Conclusion

Related Questions & Answers

>> 1. Can I reuse the LCD after removing the glass?

>> 2. What temperature is safe for heating the adhesive?

>> 3. How do I handle heavily cracked glass?

>> 4. Is a hair dryer sufficient for manual separation?

>> 5. Can I replace only the glass without a separator machine?

Citations

Separating a touch screen from an LCD is a critical skill for repairing smartphones, tablets, or laptops with damaged displays. This process requires precision, specialized tools, and an understanding of the adhesive bonding these layers. Whether you're replacing a cracked digitizer or salvaging an undamaged LCD, this guide covers professional techniques, common pitfalls, and post-repair steps to ensure success.

touch screen

Tools and Materials Required

Before starting, gather these essentials:

- LCD separator machine (manual or automated): Ideal for consistent results, especially for curved or edge screens like Samsung Galaxy models[1][3].

- Heat gun/hair dryer: Maintain temperatures between 70–120°C depending on device type[1][7].

- Suction cups and pry tools: Ensure secure grip and gentle separation without scratching the LCD[1][5].

- Molybdenum wire or thin thread (0.08–0.1 mm): Essential for slicing through adhesive layers[1][16].

- Isopropyl alcohol: Removes residual adhesive without damaging components[1][11].

- Replacement adhesive/OCA glue: Opt for UV-cured options for bubble-free bonding[1][26].

- Safety gear: Heat-resistant gloves and goggles to protect against glass shards[1][5].

Advanced Tools:

- Ultrasonic cleaners: Loosen stubborn adhesive without physical pressure[1].

- Acetone: Dissolve hardened adhesive on older devices[1].

- Vibration tools: Assist in separating tightly bonded layers[1].

Step-by-Step Separation Process

Method 1: Using an LCD Separator Machine

1. Prepare the Device:

- Power off the device and remove the battery (if applicable)[1].

- Secure the screen to the separator's platform using vacuum suction to prevent slippage[2][5].

2. Heat the Adhesive:

- Set the machine to 80–120°C based on the device model (e.g., iPhones require lower temps vs. Samsung Edge screens)[1][31].

- Allow 2–5 minutes for the adhesive to soften evenly across the screen[2][8].

3. Separate the Layers:

- Thread molybdenum wire between the glass and LCD[2][16].

- Use diagonal or horizontal motions to slice through the adhesive, adjusting pressure gradually[2][32].

4. Clean Residual Glue:

- Apply isopropyl alcohol with a microfiber cloth, avoiding abrasive materials[1][11].

Pro Tip: For curved displays like the Samsung Galaxy S8, use a separator with adjustable arms to match the screen's contour[28][31].

Method 2: Manual Separation

1. Apply Heat:

- Use a heat gun at 70–80°C to warm the edges of the glass, focusing on corners first[7][9].

2. Pry the Glass:

- Slide a thin blade or playing card under the heated edge, working incrementally around the perimeter[7][24].

- For heavily cracked screens, use fishing line to avoid pulling large shards[7][16].

3. Remove Adhesive:

- Clean the LCD with acetone if isopropyl alcohol fails, then rinse with distilled water[1][11].

Critical Tips:

- Avoid uneven heating, which can warp the LCD's polarizing layer[1][7].

- For tablets like the Lenovo Yoga 2 Pro, apply heat in 30-second intervals to prevent overheating[12][13].

touch screen integration

Advanced Techniques for Stubborn Screens

1. Freezing Method:

- Place the device in a -70°C freezer for 30 minutes to weaken adhesive bonds, then separate with a blade[36].

- Effective for older devices with hardened glue[36].

2. Double-Heating:

- Combine a separator machine with a heat gun for screens like the HP TX2500, which use dual-layer adhesives[3][12].

3. Edge-First Separation:

- For edge-sealed devices (e.g., iPhone 12), start separation from the top edge to avoid damaging flex cables[35].

Common Mistakes to Avoid

- Overheating: Exceeding 120°C may discolor LCDs or melt internal components[1][7].

- Rushing the Process: Forcing separation risks cracking both glass and LCD[1][3].

- Ignoring Safety Gear: Glass shards and chemical fumes pose health risks[1][5].

Post-Separation Steps

1. Inspect the LCD:

- Check for dead pixels, cracks, or backlight damage using a multimeter[28][30].

2. Apply New Adhesive:

- Spread OCA glue evenly, then use a laminator to remove air bubbles[2][26].

- Cure with UV light for 10–15 minutes[1][11].

3. Test Functionality:

- Reconnect components and calibrate touch sensitivity via device settings[1][12].

- For iPhones, ensure Touch ID functionality by transferring the original home button[25][35].

Troubleshooting Post-Repair Issues

- Ghost Touches: Clean the digitizer connectors or recalibrate via software[1][12].

- Flickering: Check inverter connections and backlight voltage[1][28].

- Unresponsive Areas: Replace damaged flex cables or reseat connectors[25][35].

Conclusion

Separating a touch screen from an LCD demands patience and the right tools. While separator machines offer precision for devices like the iPhone 12 or Samsung Galaxy S8, manual methods work for smaller repairs. Always prioritize safety, test components post-repair, and recalibrate the touch interface. For complex tasks, refer to model-specific guides or consult professional repair tutorials[12][28].

MT CP 201 LCD Screen Separator Machine

Related Questions & Answers

1. Can I reuse the LCD after removing the glass?

Yes, if the LCD remains undamaged. Clean residual adhesive thoroughly before reassembly[1][11].

2. What temperature is safe for heating the adhesive?

Most devices require 80–120°C. Exceeding this range risks LCD damage[1][7].

3. How do I handle heavily cracked glass?

Use a wire separator to slice through adhesive incrementally, avoiding large shards[1][16].

4. Is a hair dryer sufficient for manual separation?

Yes, but ensure even heat distribution to prevent hotspots[1][9].

5. Can I replace only the glass without a separator machine?

Yes, but manual methods have a higher failure rate. Practice on broken screens first[1][9].

By following these guidelines, you can safely separate touch screens from LCDs, whether repairing a smartphone or salvaging components. For visual demonstrations, refer to video tutorials like [LCD Separation with a 3-in-1 Machine](https://youtube.com/embed/LzWxhatRpN4) or [Manual Techniques](https://youtube.com/embed/A5baUbFJz1g)[2][9].

Citations

[1] https://www.szdingtouch.com/new/How-To-Remove-Glass-From-Lcd-Screen.html

[2] https://www.youtube.com/watch?v=LzWxhatRpN4

[3] https://www.szmtriangel.com/blogs/articles/lcd-screen-separator-operation-guide

[4] https://www.youtube.com/watch?v=gttK6GZCly0

[5] https://www.youtube.com/watch?v=SEq-H0RwhUs

[6] https://www.diyfixtool.com/blogs/news/detailed-tutorial-fix-phone-lcd-screen-parts-and-assembly

[7] https://www.ifixit.com/Answers/View/323414/What+is+the+best+way+to+separate+the+LCD+and+the+digitizer

[8] https://www.youtube.com/watch?v=5w2GoE9NaS0

[9] https://www.youtube.com/watch?v=A5baUbFJz1g

[10] https://www.youtube.com/watch?v=-vaIwRTOyXc

[11] https://www.scrcmall.com/news-show-1103256.html

[12] https://www.youtube.com/watch?v=jjXcY2McK1I

[13] https://www.youtube.com/watch?v=jjXcY2McK1I

[14] https://www.youtube.com/watch?v=a0gp7iA32PI

[15] https://www.fortec.uk/Services/Touch-Screen-Fitting/

[16] https://www.reddit.com/r/mobilerepair/comments/3hd00j/anyone_successfully_removes_and_glues_glass_with/

[17] https://www.alibaba.com/showroom/lcd-touch-seperating-machine.html

[18] https://www.diyfixtool.com/blogs/news/detailed-tutorial-fix-phone-lcd-screen-parts-and-assembly

[19] https://techcubestore.com/products/lcd-separation-machine

[20] https://www.linkedin.com/pulse/mobile-screen-lcd-refurbish-steps-tips-machines-machine-factory-

[21] https://www.aliexpress.com/w/wholesale-lcd-screen-separating-tools.html

[22] https://www.youtube.com/watch?v=rOp3Q-vIVyI

[23] https://www.aliexpress.com/i/33041304747.html

[24] https://forums.macrumors.com/threads/best-way-to-separate-cracked-glass-from-digitizer-lcd.566435/

[25] https://www.ifixit.com/Guide/iPhone+5s+LCD+and+Digitizer+Replacement/22096

[26] https://www.aliexpress.com/i/1005001627037934.html

[27] https://www.youtube.com/watch?v=4JQPNU_cOuM

[28] https://www.youtube.com/watch?v=Kh-2xgsd-co

[29] https://www.youtube.com/watch?v=SJ05sPZDeR8

[30] https://www.ifixit.com/Guide/Samsung+Galaxy+Pocket+Neo+S5310+LCD+Display+Touch+screen+Replacement/38162

[31] https://www.facebook.com/NASAN.TECHNOLOGY/videos/nasan-sp3-lcd-separator-for-samsung-edge-lcd-touch-screen-glass-separating/296231224779226/

[32] https://www.youtube.com/watch?v=LgXNbNfmLCo

[33] https://xdaforums.com/t/samsung-fascinate-touch-screen-digitizer-and-lcd-screen-repair-guide.1567938/

[34] https://www.shutterstock.com/search/lcd-replacement?page=5

[35] https://www.facebook.com/rewatechnology/videos/how-to-separate-iphone-12-touch-screen-digtizer/921158032287207/

[36] https://patents.google.com/patent/CN102629173A/en

Content Menu

Popular Products

Contact us
Follow Us
Quick Links
Products
Contact Us
Tel:+86-15338759716
E-mail:info@reshine-display.com
Add:2nd/4th Floor,Building L , Third Industrial Park, Xinwei,Longhua District,Shenzhen.
 
Copyright © 2023 Reshine Display (HK) Technology Co., Limited All Rights Reserved.